RibPort Base with 3M Backing

Part Number: 03-4064

Say hello to limitless possibilities with the RAILBLAZA RibPort Base with 3M Backing. Instantly customise your inflatable boats, stand up paddle boards and coolers with no-hassle installation of StarPort attachments. Get yours in black, white or gray.

Find A Store
RibPort Base with 3M Backing

Product Specifications

Add StarPorts to any inflatable, RIB, SUP, kayak, or locations where holes must not or cannot be drilled.


This innovative product allows you to enhance your water adventures by adding StarPort attachments such as rod holders, drink holders, navigational lighting and even a camera mount - all without having to cut any holes into the craft itself. The new 3M VHB pad (supplied) allows you to peel and stick on the RIBPort mount, then fit any of your favourite RAILBLAZA accessories.


While we recommend the best way to get a RIBPort or QuikPort fixed to your inflatable is to visit a professional service center, there are other options. Many retailers sell patch kits or adhesive for use on both Hypalon and PVC tubes. Email us for assistance and we will point you to a local supplier.


IMPORTANT: Use of petroleum based lubricants on the StarPort slide will cause failure. Silicone based products are best suited (please check contents of lubricant before using).

Features:
  • Add accessories to your inflatable boat, SUP or cooler without tools
  • 3M VHB peel and stick is supplied for easy installation on flat or slightly curved surfaces
  • Adheres to Hypalon, PVC, fibreglass, painted surfaces, and more
  • May be attached using a two pot inflatable boat glue
  • Available in black, white or gray
Parts Included:

1 x RibPort

1 x 3M Backing

Available in 3 colors

- 03-4064-11 - RIBPort Black

- 03-4064-21 - RIBPort White

- 03-4064-51 - RIBPort Grey

Material Composition
UV-Stabilised Fibreglass Reinforced Plastic

Image
RibPort Base with 3M Backing Overview

NO HOLES REQUIRED  - The RAILBLAZA RibPort Base with 3M Backing is the revolutionary new product that allows you to add StarPort attachments to your inflatable boats, stand up paddle boards and coolers without having to cut any holes in the craft itself.


CHOICES, CHOICES - Install with the 3M adhesive backing supplied or talk to your nearest professional service centre for advice on patch kits or adhesives for Hypalon or PVC. Plus, it’s available in your choice of three colours: black, white or gray.


UNLOCK ENDLESS POSSIBILITIES - With the RAILBLAZA RibPort Base with 3M Backing, you’ll never be limited by your gear ever again. Add rod holders, drink holders, navigational lighting and even a camera mount to your adventures - all without having to cut any holes into the craft itself.

Read More

RibPort Base with 3M Backing

Play
Review(s)

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-1 of 1 review
  1. Great design and easy to work with